Hoboken Painter Inc | Start with a Free Quote Now! 201-777-0067

Hoboken Painter: Paint Your Apartment for Less! Fully insured & family-owned. Reliablie interior painting services for Hoboken, Jersey City, Weehawken & Bayonne. Start with a Free Quote!

Stucco Exteriors in Englewood Cliffs: Elastomeric Paint in Plain English

Drive up Sylvan Avenue in Englewood Cliffs on a clear afternoon and the houses look perfect from the car. Big lots, quiet streets, the Palisades dropping away toward the Hudson on one side and the George Washington Bridge sitting out there in the haze. Then you park, walk up to the front wall, and the story changes. Hairline cracks. Dozens of them, running like a road map across the stucco — around the windows, under the eaves, in a neat stair-step down one corner. From the curb you'd never know. Up close, it's the first thing you see.

We paint a lot of stucco in Bergen County, and Englewood Cliffs might be the town where this conversation comes up most. It's a small borough — about 5,342 people at the last census, with a median home value around $1.4 million — and a surprising share of its houses wear stucco. The town sits right on top of the Hudson Palisades, and the homes up there take weather from two directions: summer sun baking the west-facing walls all afternoon, then freeze-thaw all winter. Stucco doesn't love either one. It moves a little with every season, and movement is what makes those hairline cracks.

So here's the product that gets named in almost every one of these conversations: elastomeric paint. Homeowners hear the word from a neighbor, or a contractor drops it in a quote, and it sounds like the answer. Sometimes it is. Sometimes it's an expensive way to paint over a problem that needed a repair first. This is the plain-English version — what it is, what the cans actually say, what it costs, and when we'd tell you not to use it.

What elastomeric paint actually is

Forget the marketing for a second. Elastomeric paint is a thick, flexible acrylic coating that dries into a stretchy membrane instead of a thin, hard skin. The Sealant, Waterproofing and Restoration Institute — the trade body that writes the specs for this stuff — defines it as a fluid-applied material that dries to a solid elastic membrane, one that expands and contracts with the wall and has the memory to return to its original shape. Think rubber band, not eggshell.

That's the whole idea. A stucco wall is never perfectly still. It warms up in the afternoon sun, cools down at night, shifts a fraction through the seasons. A hairline crack opens and closes with it, by a tiny amount. Ordinary exterior paint dries to a fairly stiff film. When the crack underneath opens, that film can split right along the crack line, and rain finds the gap again. An elastomeric coating stretches across the opening and comes back when the crack closes, so the surface stays in one piece and rain runs down the face instead of soaking in.

It also goes on much thicker than normal paint. A standard exterior acrylic goes on at roughly 3 to 5 wet mils per coat. Elastomeric coatings run 10 to 15 wet mils and up — Sherwin-Williams' Loxon XP, for example, is specified at 14.5 to 18.5 wet mils per coat. That's three or four times the film build, which is why a stucco job in elastomeric drinks so much more paint than the same house in regular acrylic. We'll get to the money in a minute.

One more thing the name gets wrong: elastomeric is water-resistant, not waterproof. It blocks liquid water — wind-driven rain, the kind that hits a Palisades-facing wall sideways in a nor'easter — but it stays breathable, so vapor from inside the wall can still escape. That breathability is the difference between a coating that lasts and one that traps moisture and peels off in sheets. Any elastomeric worth buying will publish a perm rating on its data sheet. If it doesn't, that's your answer.

Why stucco cracks in Englewood Cliffs

Not every crack means the same thing, and the first job on any stucco house is figuring out which kind you're looking at. Around Englewood Cliffs, most of them fall into three buckets.

The first is plain thermal movement. Stucco is cement, sand, and lime. It expands in heat and shrinks in cold, and the walls facing west — the ones catching the afternoon sun off the river — move the most. Over years, that daily flex opens hairline cracks, usually around openings: window corners, door frames, where the stucco meets a different material. These are the cracks elastomeric was made for.

The second is water getting in from above. The National Park Service's Preservation Brief 22 on historic stucco — still the best plain-language document on the subject — lists the usual culprits: leaking gutters, failed downspouts, open joints around windows, splash-back at the foundation. Water finds a way behind the stucco, the stucco softens, and the cracks follow. Paint over that without fixing the water first and you've just sealed the moisture in. We say this on every stucco job and we'll say it again here: the coating is the last step, not the first.

The third is the house settling. Englewood Cliffs sits on the Palisades ridge, and plenty of its houses are mid-century or older, built on ground that has had decades to move. A stair-step crack running diagonally from a window corner, or a crack you can fit a coin edge into, is not a paint problem. That's a conversation with a mason or a structural engineer before anybody opens a paint can.

The crack test: what elastomeric can bridge, and what it can't

Here's the number that matters. The SWR Institute caps elastomeric crack bridging at 1/32 of an inch — about the thickness of a credit card edge — and that ceiling only holds when the coating goes on at the manufacturer's specified film thickness. Benjamin Moore's Ultra Spec Masonry Elastomeric says the same thing on its data sheet: bridges cracks up to 1/32". BEHR's elastomeric, Sherwin-Williams' Loxon XP — same story. The industry agrees on this number, which is rare enough to take seriously.

So walk the house with a coin in your hand. A crack you can see but can't fit the coin's edge into is a hairline — elastomeric territory. A crack that takes the coin, or one side of which sits higher than the other, needs a real repair first: rout it out, fill it with a proper patching compound, let it cure. The ICRI's Concrete Repair Bulletin puts it plainly — static hairline cracking can be handled by an elastomeric coating, but larger cracks should be routed and sealed before any coating goes on. It also warns, honestly, that patching changes how the wall looks. A patched crack can show up as a visible scar against the surrounding texture, and on a big stucco wall with a lot of patches, you can end up with what the bulletin calls a "checkerboard" appearance. That's one reason we push clients toward a full elastomeric coat rather than spot-patching a dozen cracks and calling it done — the thick film unifies the surface in a way patches never will.

And tap the wall while you're walking it. The Park Service brief notes that unsound or soft areas will echo hollow when you knock on them. Hollow stucco is delaminated — it's coming off the wall, and no coating on earth will hold it up. That section gets cut out and re-stuccoed. No exceptions, no matter how good the paint is.

What the cans actually say

Three products dominate this conversation in New Jersey, and their data sheets tell you most of what you need to know. They're all 100% acrylic, all breathable, all built to bridge hairline cracks. The differences are in the numbers.

Benjamin Moore's Ultra Spec Masonry Elastomeric Waterproofing Coating (the low-lustre 0360) stretches 300%, bridges cracks to 1/32", and covers 60 to 80 square feet per gallon at 20 wet mils. It dries to the touch in about 2 hours and recoats in 12. It passes the ASTM D6904 wind-driven rain test, and it breathes at 38 perms. The catch is temperature: don't apply it below 50°F or above 100°F, and don't apply it if rain is expected within 24 hours. In New Jersey, that 50-degree floor rules out a lot of late fall and early spring days.

Sherwin-Williams' Loxon XP is the one we reach for most on stucco, and the reason is in the fine print. It covers 85 to 110 square feet per gallon per coat — about 80 on porous, rough stucco — at 14.5 to 18.5 wet mils, and it can go on down to 35°F with no primer required, even over high-pH surfaces up to pH 13. For the full waterproofing system, Sherwin-Williams wants two coats at 13 to 16.4 mils total dry film thickness, with ten or fewer pinholes per square foot. Touch dry in 4 hours, recoat in 24. That 35-degree minimum is the difference between a November job that works and one that doesn't, and it's why Loxon XP shows up on so many Bergen County stucco houses.

BEHR's Premium Elastomeric Masonry, Stucco & Brick Paint (No. 68) is the third option, and its headline number is the stretch: up to 600% elongation. It covers 75 to 125 square feet per gallon depending on the surface, dries to the touch in 4 to 6 hours, recoats in 24 hours, and takes a full two weeks to cure. New masonry needs at least 30 days of cure before it goes on.

Read those coverage numbers again, because they're the reason elastomeric jobs cost what they cost. A standard exterior acrylic covers 250 to 350 square feet per gallon. Elastomeric covers 60 to 110. Same wall, three to four times the paint. That's not a markup — that's the product doing what it's designed to do.

If you're comparing these with a contractor, ask which one he's quoting and why. There's no wrong answer among the three, but there should be an answer. "Elastomeric" on a quote with no product name is a quote that hasn't been thought through yet. For a fuller head-to-head on the two big brands, our Benjamin Moore vs. Sherwin-Williams in NJ breakdown covers where each one wins.

Prep: the part nobody wants to pay for

Every elastomeric job we've ever done that failed, failed in prep. Not in the product — in the wall underneath it. The coating is thick and heavy, and it will hold onto whatever it's stuck to. If what it's stuck to is chalky old paint, dirt, or mildew, it comes off with all of it.

The order is always the same. Wash first — pressure wash the whole wall, and if there's mildew, treat it before you wash, not after. Then fix the water: gutters, downspouts, flashing, any joint that's letting water behind the stucco. Then repair the cracks that are too wide for the coating, and tap-test for hollow spots. Then let it dry. Really dry. Elastomeric coatings are sensitive to moisture in the wall in a way regular paint isn't — water trapped behind that thick film is what causes the blistering you see on bad jobs.

New stucco and fresh patches need time too. The Park Service brief notes that new stucco can need up to a year before it takes oil-based paint; for acrylic and elastomeric coatings the practical number is shorter — BEHR wants at least 30 days of cure on new masonry, and Loxon XP can go on surfaces as young as 7 days — but the principle holds: fresh cement is highly alkaline, and paint applied too early can fail from the alkalinity alone. Both the Benjamin Moore and Sherwin-Williams products are rated to pH 13, which covers most cured stucco, but "most" isn't "all," and on a fresh patch we test before we coat.

One more prep note for older Englewood Cliffs houses: if the house was built before 1978, the old paint underneath may contain lead, and the EPA's Renovation, Repair and Painting rule applies to any work that disturbs it. We covered the New Jersey lead-safe rules in detail in our post on painting over old lead paint in pre-war buildings — the short version is that lead-safe certificates in New Jersey now run three years under state law, and the prep on a pre-1978 stucco house has to be done by certified hands.

The New Jersey weather window

Elastomeric paint is pickier about weather than regular exterior paint, and in Bergen County that matters more than the product choice. The temperature floor is the first limit: 50°F for the Benjamin Moore product, 35°F for Loxon XP. But the number on the can is air temperature, surface temperature, and material temperature all at once — the wall itself has to be above the minimum, and it has to stay there while the coating cures. A 48-degree afternoon with a north-facing wall in shade is not a painting day, even if the thermometer on your porch says otherwise.

The second limit is dew. Elastomeric coatings stay sensitive to rain and condensation longer than conventional paint because the film is so thick — it takes longer to dry through. Evening dew on a freshly coated wall can leave a milky blush in the finish that doesn't go away. So the working rule on our crews is late morning starts, sun on the wall, done by mid-afternoon, and nothing coated after the dew point starts closing in.

How much of the year does that leave? Newark's average first frost lands around November 8, and the last spring frost usually falls in mid-April. That's the frost-free window, not the painting window — the real one is narrower, because a 45-degree day with a damp north wall is a no-go even if it never freezes. In practice, the reliable elastomeric season in Bergen County runs from late April through October, with November possible only on the low-temperature products and only on south- and west-facing walls in full sun. Our fall exterior checklist for New Jersey homes walks through the same math with the NOAA frost dates — worth a read if you're eyeing a late-season job.

If a contractor tells you he can coat your stucco in January, ask him which product, and then read the data sheet yourself. The answer is in the temperature line.

What it costs

Elastomeric costs more than standard exterior paint, and the reasons are all visible in the numbers above: three to four times the gallons, two coats instead of one, and prep that takes longer because every crack has to be judged before the coating goes on.

For a sense of the range, a MarketMinute cost survey published in October 2026 puts exterior house painting nationally at $1.50 to $5.00 per square foot, with a typical 2,000-square-foot home running $3,000 to $10,000, and labor making up 70 to 90 percent of the bill. In New Jersey the numbers sit higher: our statewide cost guide puts New Jersey exteriors at $1,900 to $6,900, with a two-story house at $7,000 to $12,000, and Northeast labor running 20 to 25 percent above the national average. Prep alone is typically 40 to 60 percent of the labor on a job like this.

Here's how that pencils out on a real house. Take a two-story stucco home in Englewood Cliffs, about 2,000 square feet of footprint — roughly 1,700 square feet of paintable wall once you subtract windows and doors. Two coats of elastomeric at 80 to 110 square feet per gallon means 31 to 43 gallons of coating. The same walls in a standard exterior acrylic at 250 to 350 square feet per gallon would take 10 to 14 gallons. That's the material difference, and it's before a gallon of primer, a tube of patching compound, or an hour of labor enters the picture. At the published per-square-foot ranges, that house lands somewhere around $7,000 to $12,000 for a thorough two-coat elastomeric job with proper prep — and the low end of that range is a house in good shape with hairline cracks only. A wall that needs patching, a hollow section cut out, or a full wash-and-treat cycle will push past it.

Those are planning numbers, not a quote. Every stucco house is its own job — the texture, the crack count, the access, the height of the walls all move the price. But if a bid for a two-coat elastomeric job on a two-story stucco house comes in at half that range, something's missing: either it's one coat, or it's standard paint with "elastomeric" written on the estimate, or the prep isn't in there. Ask which one.

The other way to think about the cost is per year. A standard exterior paint job in New Jersey lasts five to seven years before it starts looking tired. A properly applied elastomeric system on sound stucco can run ten to fifteen. You're paying more per gallon and more per coat, but you're buying the years between repaints. On a house you plan to stay in, the math usually favors the thicker coating. On a house you're selling next spring, it usually doesn't — and that's a conversation worth having honestly before the estimate goes out. If selling is on your mind, our list of the best realtors for sellers in Hudson and Bergen counties is a good place to start the other half of that decision.

When elastomeric is the wrong call

Elastomeric paint is a good product with real limits, and a contractor who recommends it for every stucco wall hasn't read the data sheets — or hasn't read the wall.

The first no is water coming from behind. If the moisture is rising damp from the foundation, or a leak that's still leaking, or a wall that stays wet because the grade slopes toward the house, elastomeric will trap that water behind a thick film and make the failure worse. Fix the water first. If the water can't be fixed, elastomeric isn't the answer — the answer is whatever fixes the water.

The second no is historic masonry. The Park Service is blunt about this: waterproof coatings, including elastomeric paints, should almost never go on historic masonry above ground. Old lime-based stucco needs to breathe more freely than any modern coating allows, and sealing it can do real damage to the wall underneath. If your Englewood Cliffs house has original lime stucco — and a few of the older ones do — get a preservation-minded mason involved before anyone talks about coatings.

The third no is EIFS, the synthetic stucco system that's really foam board with a thin finish coat. EIFS cracks differently, fails differently, and takes different products. An elastomeric coat over a failing EIFS system hides the evidence while the foam underneath keeps taking on water. If your walls are EIFS rather than traditional cement stucco, the inspection matters more than the paint.

And the fourth no is the one nobody likes hearing: if the stucco is too far gone — widespread hollow spots, deep structural cracks, a wall that's been patched so many times it looks like a quilt — the honest answer is re-stuccoing, not coating. A thick coat of paint over a dying wall buys you a season or two and a bigger bill later.

The short version

Stucco in Englewood Cliffs cracks because the Palisades climate moves it — hot afternoons, cold winters, wind-driven rain off the river. Elastomeric paint handles the cracks that matter, the hairline ones up to 1/32 of an inch, by stretching over them instead of splitting with them. It costs more because it goes on three to four times thicker than regular paint and needs two coats to do its job. It needs a clean, dry, repaired wall underneath, and it needs weather warm enough and dry enough for a thick film to cure — which in Bergen County means late April through October, with the low-temperature products stretching the season a few weeks on either side.

Get those pieces right and a stucco house up on the ridge can go a decade or more without needing another coat. Get them wrong and you've bought the most expensive paint job that ever peeled.

If your stucco is showing its age and you want someone to walk the walls with you — coin test, tap test, the whole thing — that's what we do. Request a free quote and we'll come take a look, tell you which cracks are paint and which ones are repair, and give you a number you can plan around. We also wrote up the same decision for bigger Bergen County exteriors — the Alpine estate exterior, the Franklin Lakes colonial cost breakdown, and the Tenafly historic trim guide — if you want to see how the same prep-first thinking plays out on the neighbors' houses. And if your siding is cedar rather than stucco, the Saddle River cedar shake guide covers the stain-versus-paint version of the same argument.